Http Server - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

http server

Use the http server command to enable the Hypertext Transfer Protocol (HTTP) server on the AOS
device. Enabling the server enables Web access to the AOS unit. Use the no form of this command to
disable the HTTP server. Variations of this command include:
http server
http server <TCP port>
Syntax Description
<TCP port>
Default Values
By default, the HTTP server is disabled.
Command History
Release 3.1
Release 18.3
Release R10.1.0
Usage Examples
The following example enables the HTTP server:
(config)#http server
60000CRG0-35E
Optional. Specifies an alternate Transmission Control Protocol (TCP) port
for the HTTP server.
Command was introduced.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products.
Command syntax was changed to remove the ip keyword for ADTRAN
voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
971