ADTRAN AOS Version R10.1.0 Command Reference Manual page 1049

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ip mgcp max2 <value>
Use the ip mgcp max2 command to specify the number of Media Gateway Control Protocol (MGCP)
message retransmissions between the MGCP gateway and the call agent before the gateway disconnects.
Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, MGCP retransmissions before gateway disconnection is set to 7.
Command History
Release A2
Functional Notes
When the gateway has retransmitted MGCP messages max2 times, it indicates that the gateway has
already exceeded the max1 value (refer to the command
contact the domain naming system (DNS) to search for alternate call agent interfaces which to connect. If
the gateway does not find any available call agent interfaces for connection, the gateway will disconnect.
The max2 value must always be greater than the max1 value. If the max1 value is
specified to be greater than the max2 value, the max2 value is automatically defined as
max1 + 1.
For more information about MGCP configuration, refer to the MGCP in AOS configuration guide available
online at
https://supportforums.adtran.com
Usage Examples
The following example specifies that the MGCP gateway will retransmit MGCP messages 30 times before
disconnecting from the call agent:
(config)#ip mgcp max2 30
60000CRG0-35E
Specifies the number of message retransmissions that will occur before the
gateway disconnects from the call agent. Range is 1 to 255.
Command was introduced.
(article number 2347).
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
ip mgcp max1 <value> on page
1048) and it will
1049

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents