ADTRAN AOS Version R10.1.0 Command Reference Manual page 230

Command Reference Guide
debug chat-interfaces <chat interface>
Use the debug chat-interfaces command to activate debug messages associated with chat AT
command-driven interfaces. Debug messages are displayed (real time) on the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<chat interface>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates debug messages for the chat interface 0/1:
>enable
#debug chat-interfaces 0/1
60000CRG0-35E
Activates debug messages for the specified chat interface identified by the
slot/port.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
230