ADTRAN AOS Version R10.1.0 Command Reference Manual page 707

Command Reference Guide
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal length (using the terminal length command; refer to
page 837).
Usage Examples
The following is sample output from the show processes cpu command:
>enable
#show processes cpu
processes cpu
System load: 7.07%
Context switch load: 0.21%
Task Task
D Name
0 Idle
1 FrontPanel
3 Stack Usage
4 Q Test 1
5 Q Test 2
--MORE--
60000CRG0-35E
Min: 0.00% Max 85.89%
Invoked Exec
PRI STAT (count)
0 W 129689
249 W 9658
11 W 485
10 W 50
11 W 50
Copyright © 2012 ADTRAN, Inc.
terminal length <number> on
Time Runtime Load%
(sec) (sec) (1 sec)
1971 927923 92.79
165 3202 0.32
305 325 0.03
4 0 0.00
6 0 0.00
Enable Mode Command Set
707