Show Vlan - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show vlan

Use the show vlan command to display current virtual local area network (VLAN) information. Variations
of this command include:
show vlan
show vlan brief
show vlan brief realtime
show vlan id <vlan id>
show vlan id <vlan id> realtime
show vlan name <name>
show vlan name <name> realtime
show vlan realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
brief
id <vlan id>
name <name>
realtime
Default Values
No default values are necessary for this command.
60000CRG0-35E
Optional. Shows an abbreviated version of the VLAN information (brief
description).
Optional. Shows information regarding a specific VLAN, specified by a VLAN
interface ID (valid range: 1 to 4094).
Optional. Shows information regarding a specific VLAN, specified by a VLAN
interface name (up to 32 characters).
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
785