ADTRAN AOS Version R10.1.0 Command Reference Manual page 340

Command Reference Guide
debug ntp
Use the debug ntp command to activate debug messages associated with the Network Time Protocol
(NTP) daemon information. Debug messages are displayed (real time) on the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.2
Usage Examples
The following example activates debug messages associated with NTP:
>enable
#debug ntp
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
340