ADTRAN AOS Version R10.1.0 Command Reference Manual page 978

Command Reference Guide
interface efm-group <group number>
Use the interface efm-group command to create an Ethernet in the first mile (EFM) group and enter the
group's configuration. Use the no form of this command to remove the EFM group.
Syntax Description
<group number>
Default Values
By default, no EFM groups exist.
Command History
Release A4.01
Functional Notes
The EFM group is a logical interface that represents the EFM bonding group. The interfaces that are
connected to the EFM group provide physical links to carry the bonded traffic. For more information about
configuring the EFM group, refer to
Usage Examples
The following example creates EFM group 1 and enters the group's configuration mode:
(config)#interface efm-group 1
(config-efm-group 1)#
60000CRG0-35E
Specifies the EFM group. Range is 1 to 1024.
Command was introduced.
EFM Group Command Set on page
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
2166.
978