ADTRAN AOS Version R10.1.0 Command Reference Manual page 706

Command Reference Guide
show processes
Use the show processes command to display process statistic information. Variations of this command
include:
show processes cpu
show processes cpu realtime
show processes history
show processes queue
show processes stack
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
cpu
realtime
history
queue
stack
Default Values
No default values are necessary for this command.
Command History
Release 3.1
Release 10.1
Release 17.1
Release 17.5
60000CRG0-35E
Displays information about processes that are currently active.
Optional. Displays full-screen CPU output in real time. Refer to the
Functional Notes below for more information.
Displays the process switch history.
Displays process queue utilization.
Displays the process stack usage.
Command was introduced.
New option was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include the stack parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
706