ADTRAN AOS Version R10.1.0 Command Reference Manual page 960

Command Reference Guide
hostname <name>
Use the hostname command to create a name used to identify the unit. This alphanumeric string should be
used as a unique description for the unit. This string will be displayed in all prompts. Use the no form of
this command to remove a host name.
Syntax Description
<name>
Default Values
By default, the host name is router.
Command History
Release 1.1
Usage Examples
The following example creates a host name for the AOS device of ATL_RTR to identify the system as the
Atlanta router:
(config)#hostname ATL_RTR
60000CRG0-35E
Identifies the unit using an alphanumeric string up to 32 characters.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
960