ADTRAN AOS Version R10.1.0 Command Reference Manual page 791

Command Reference Guide
show voice dial-plan
Use the show voice dial-plan command to view number display templates. Variations of this command
include:
show voice dial-plan
show voice dial-plan <number>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Release 17.1
Usage Examples
The following example displays information about number display template 1:
>enable
#show voice dial-plan 1
Type
------------------------------------------------------------------
Always Permitted
60000CRG0-35E
Optional. Displays information about a specific number display template.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
ID Pattern
1 NXXNXXXXXX
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
791