ADTRAN AOS Version R10.1.0 Command Reference Manual page 436

Command Reference Guide
Syntax Description
any-vrf
ipv4
ipv6
vrf <name>
<ipv4 address>
<ipv6 address>
advertised-routes
received-routes
routes
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Release 17.1
Release 18.3
Release R10.1.0
Functional Notes
Entries that are not filtered by prefix lists are marked with an asterisk (*) to show they are valid. Entries that
are deemed the best path to advertised route are marked with a caret (>).
60000CRG0-35E
Optional. Displays BGP information for all VPN routing and forwarding
(VRF) instances.
Displays IPv4 BGP route information.
Displays IPv6 BGP route information.
Optional. Displays BGP information for a specific VRF instance.
Optional. Displays information for the specified neighbor. IPv4 addresses
should be expressed in dotted decimal notation (for example, 10.10.10.1).
If no IPv4 address is entered, information for all neighbors is displayed.
Optional. Displays information for the specified neighbor. IPv6 addresses
should be expressed in colon hexadecimal format (for example,
2001:DB8:1::1).
If no IPv6 address is entered, information for all neighbors is displayed.
Optional. Displays all routes being advertised to the specified neighbor.
Command output is the same as for show bgp except filtered to only the
BGP routes being advertised to the specified neighbor.
Optional. Displays all routes (accepted and rejected) advertised by the
specified neighbor. Routes may be rejected by inbound filters, such as
prefix list filters.
Optional. Displays all accepted received routes advertised by the specified
neighbor. Routes displayed have passed inbound filtering. This command
output is the same as show ip bgp except the output is filtered to those
learned from the specified neighbor.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products. Command was also expanded to
include the any-vrf, ipv4, and vrf <name> parameters.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products. Command was also expanded to include the
ipv6 and <ipv6 address> parameters.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
436