ADTRAN AOS Version R10.1.0 Command Reference Manual page 832

Command Reference Guide
sip check-sync
Use the sip check-sync command to send a check-sync notification to all IP phones registered to the unit.
When an IP phone receives this check-sync notification, the phone will check for possible configuration
changes stored on the server. Variations of this command include the following:
sip check-sync
sip check-sync firmware-upgrade
sip check-sync <user name or ip address>
Syntax Description
firmware-upgrade
<user name or ip address>
Default Values
No default values are necessary for this command.
Command History
Release 13.1
Usage Examples
The following example notifies all IP phones to check for a change in configuration:
>enable
#sip check-sync
60000CRG0-35E
Optional. Specifies a check-sync to be used when upgrading phone
firmware.
Optional. Specifies the phone to contact with configuration changes.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
832