ADTRAN AOS Version R10.1.0 Command Reference Manual page 684

Command Reference Guide
show network-forensics ip dhcp
Use the show network-forensics ip dhcp command to display collected Dynamic Host Configuration
Protocol (DHCP) information for clients connected to the network. The display of the collected
information can be for all connected clients or for a specific client. Variations of this command include:
show network-forensics ip dhcp
show network-forensics ip dhcp hostname <hostname>
show network-forensics ip dhcp interface gigabit-switchport <slot/port>
show network-forensics ip dhcp ip <ip address>
show network-forensics ip dhcp mac <mac address>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
hostname <hostname>
interface gigabit-switchport <slot/port>
ip <ip address>
mac <mac address>
Default Values
No default values are necessary for this command.
Command History
Release 17.8
60000CRG0-35E
83.
Optional. Displays DHCP information for the client with the
specified host name.
Optional. Displays DHCP information for the client using the
specified interface.
Optional. Displays DHCP information for the client at the
specified IP address. IP addresses should be expressed in
dotted decimal notation (for example, 10.10.10.1).
Optional. Displays DHCP information for the client at the
specified medium access control (MAC) address. MAC
addresses should be expressed in the following format:
xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
684