ADTRAN AOS Version R10.1.0 Command Reference Manual page 229

Command Reference Guide
debug bridge
Use the debug bridge command to display messages associated with bridge events. Debug messages are
displayed (real time) to the terminal (or Telnet) screen. Use the no form of this command to disable the
debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 8.1
Usage Examples
The following example activates bridge debug messages:
>enable
#debug bridge
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
229