Command Reference Guide
ip rtp qos dscp <value>
Use the ip rtp qos dscp command to configure the differentiated services code point (DSCP) value with
which to mark IP Realtime Transport Protocol (RTP) packets. This marking can then be used by the
quality of service (QoS) mechanisms to give priority for this type of traffic in the unit. Use the no form of
this command to disable this feature.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example sets the DSCP value to 63:
(config)#ip rtp qos dscp 63
60000CRG0-35E
Specifies the DSCP value. Valid range is 0 to 63.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1083