ADTRAN AOS Version R10.1.0 Command Reference Manual page 269

Command Reference Guide
debug http client
Use the debug http client command to activate debug messages associated with Hypertext Transfer
Protocol (HTTP) client operation in AOS. Debug messages are displayed (real time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 16.1
Release 18.3
Release R10.1.0
Usage Examples
The following example activates debug messages associated with HTTP client activity:
>enable
#debug http client
60000CRG0-35E
Command was introduced.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
269