ADTRAN AOS Version R10.1.0 Command Reference Manual page 587

Command Reference Guide
show ip policy-stats
Use the show ip policy-stats command to display a list of current Internet Protocol version 4 (IPv4) access
control policy (ACP) statistics. Refer to
configuring IPv4 ACPs. Variations of this command include:
show ip policy-stats
show ip policy-stats <ipv4 acp name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<ipv4 acp name>
Default Values
No default values are necessary for this command.
Command History
Release 3.1
Release 17.1
Usage Examples
The following example displays a list of current IPv4 ACP statistics:
>enable
#show ip policy-stats
60000CRG0-35E
ip policy-class <ipv4 acp name> on page 1058
Optional. Displays policy class statistics for a specific IPv4 ACP.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
for information on
587