ADTRAN AOS Version R10.1.0 Command Reference Manual page 478

Command Reference Guide
Usage Examples
The following is sample output from the show dot11 access-point command:
>enable
#show dot11 access-point
Wireless Access Points:
Name
------------------------------------------------------------------------------
ADTN1DF857
60000CRG0-35E
MAC-Address AP Status
00:A0:C8:1D:F8:57 Session
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
Cfg'd Control Status
------- -----------------------
Y Ctl_by_This_AC
478