ADTRAN AOS Version R10.1.0 Command Reference Manual page 193

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
copy dynvoice-config
Use the copy dynvoice-config command to copy the dynamic voice configuration file to the specified
destination.
Variations of this command (valid only on AOS units WITH CompactFlash
include:
copy dynvoice-config cflash <filename>
copy dynvoice-config flash <filename>
copy dynvoice-config http <url>
copy dynvoice-config running-config
copy dynvoice-config tftp
copy dynvoice-config xmodem
Syntax Description
cflash <filename>
flash <filename>
http <url>
running-config
tftp
xmodem
60000CRG0-35E
Copies the dynamic voice configuration file and saves it to the
CompactFlash card using the specified file name.
Copies the dynamic voice configuration file and saves it to flash memory
using the specified file name.
Copies the dynamic voice configuration file and transfers it to a Hypertext
Transfer Protocol (HTTP) server using the specified HTTP server uniform
resource locator (URL). Use HTTP PUT operation.
Replaces the active running configuration with a copy of the dynamic voice
configuration file.
Copies the dynamic voice configuration file and saves it to the specified
Trivial File Transfer Protocol (TFTP) server.
After entering copy dynvoice-config tftp, AOS prompts for the following
information:
Address of remote host:
Source filename:
Destination filename:
Copies the dynamic voice configuration file (using the XMODEM protocol)
and saves it to the terminal connected to the console port. XMODEM
capability is provided in VT100 terminal emulation software, such as
HyperTerminal.
After entering copy dynvoice-config xmodem, AOS prompts for the
following information:
Source filename:
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
®
AND voice capability)
Specifies the IP address of the TFTP server.
Specifies the name of the file (located on the
CompactFlash card) to copy to the TFTP server.
Specifies the file name to use when storing the
copied file on the TFTP server. (The file will be
placed in the default directory established by the
TFTP server.)
Specifies the name of the file to copy from
CompactFlash to the connected terminal.
193

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents