Show Power Inline - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show power inline

Use the show power inline command to display power information (in watts) for devices connected to
Power over Ethernet (PoE) interfaces. The command also displays the PoE interfaces that can be powered,
whether the interfaces are powered or not, and the IEEE class for the device(s) connected to the PoE
interfaces. Variations of this command include:
show power inline
show power inline <slot/port>
show power inline <slot/port> realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
<slot/port>
realtime
Default Values
No default values are necessary for this command.
Command History
Release 9.1
Release 11.1
Release 17.1
60000CRG0-35E
Optional. Specifies the slot/port of a PoE interface. If specified, the
command only displays information related to that interface.
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Command was introduced.
The realtime display parameter was added.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
699