ADTRAN AOS Version R10.1.0 Command Reference Manual page 780

Command Reference Guide
show usb attached-devices
Use the show usb attached-devices command to display statistics for universal serial bus (USB) devices
attached to the USB wireless wide area network (WWAN) network interface module (NIM) or the USB
port on the AOS unit. The output from this command includes the attached device identification, the
product identification, the device class, the device manufacturer and model, and the slot and port used by
the device. Variations of this command include:
show usb attached-devices
show usb attached-devices detail
The NetVanta USB WWAN NIM supports cellular connections through a USB cellular
modem provided by the service provider. For more information about configuring the
NetVanta USB WWAN NIM or the cellular interface, refer to
Set on page 1537
available online at https://supportforums.adtran.com.
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
detail
Default Values
No default values are necessary for this command.
Command History
Release 17.8
Release 18.2
Usage Examples
The following is sample output from the show usb attached-devices command:
>enable
#show usb attached-devices
USB Device attached
VendorID: 1410
ProductID: 6000
DeviceClass: 0x2 (Communications)
60000CRG0-35E
or the USB WWAN NIM and the Cellular Interface configuration guide
Displays all available device statistics.
Command was introduced.
Command was expanded to include the detail parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
Cellular Interface Command
83.
780