Show Memory - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show memory

Use the show memory command to display statistics regarding memory, including memory allocation and
buffer use statistics. Shows how memory is in use (broken down by memory size) and how much memory
is free. Variations of this command include:
show memory heap
show memory heap realtime
show memory uncached-heap
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Using the realtime argument for this command can adversely affect the performance of
your unit.
Syntax Description
heap
realtime
uncached-heap
Default Values
No default values are necessary for this command.
Command History
Release 3.1
Release 10.1
Release 17.1
60000CRG0-35E
Shows how much memory is in use (broken down by memory block size)
and how much memory is free.
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Shows how much memory has been set aside to be used without memory
caching, how much memory is being used, and how much memory is free.
Command was introduced.
The realtime display parameter was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
677