ADTRAN AOS Version R10.1.0 Command Reference Manual page 319

Command Reference Guide
debug ip urlfilter
Use the debug ip urlfilter command to display a summary of debug information for all uniform resource
locator (URL) filters being used. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. The verbose option gives more detailed information. Use the no form of this command to disable
the debug messages. Variations of this command include:
debug ip urlfilter
debug ip urlfilter verbose
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 12.1
Usage Examples
The following example shows the debug summary for all URL filters being used:
>enable
#debug ip urlfilter
2005.11.06 05:31:52 Connected to a Websense server
2005.11.06 05:33:26 Allowed http://www.adtran.com/
60000CRG0-35E
Optional. Enables detailed debug messages.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
319