ADTRAN AOS Version R10.1.0 Command Reference Manual page 299

Command Reference Guide
debug ip pim-sparse hello
Use the debug ip pim-sparse hello command to display protocol-independent multicast (PIM) sparse
mode hello transactions. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Usage Examples
The following example activates PIM sparse mode hello messages:
>enable
#debug ip pim-sparse hello
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
299