ADTRAN AOS Version R10.1.0 Command Reference Manual page 291

Command Reference Guide
debug ip mrouting
Use the debug ip mrouting command to activate debug messages associated with multicast table routing
events. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 10.1
Usage Examples
The following sample activates ip mrouting debug messages:
>enable
#debug ip mrouting
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
291