ADTRAN AOS Version R10.1.0 Command Reference Manual page 807

Command Reference Guide
show voice pickup-group
Use the show voice pickup-group command to display all configured call pickup groups (or a specific
group). Variations of this command include:
show voice pickup-group
show voice pickup-group <name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release A4.01
Usage Examples
The following is sample output from the show voice pickup-group command:
(config)#show voice pickup-group
Pickup Group: Group1
Description: 4th floor sales
Pickup Group Extension: 8508
Members Firstname
-----------------------------------------------
0330 Vickie
2003 Marc
2013 Patrick
2007 Drew
2006 Sarah
1012 Jessica
60000CRG0-35E
Optional. Specifies a particular call pickup group to display.
Command was introduced.
Lastname
Spinaker
Starkalous
Wales
Lever
Williams
Thomas
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
807