ADTRAN AOS Version R10.1.0 Command Reference Manual page 1024

Command Reference Guide
ip flow export template
Use the ip flow export template command to configure template exportation rates for integrated traffic
monitoring (ITM). Use the no form of this command to return rate values to the default setting. Variations
of this command include:
ip flow export template refresh-rate <packets>
ip flow export template timeout-rate <minutes>
Syntax Description
refresh-rate <packets>
timeout-rate <minutes>
Default Values
By default, template information is sent every 20 packets, and template information is re-sent every
30 minutes.
Command History
Release 16.1
Usage Examples
The following example configures the template information to be sent every 50 packets:
(config)#ip flow export template refresh-rate 50
In the following example, traffic flow template information is configured to resend every 15 minutes:
(config)#ip flow export template timeout-rate 15
Technology Review
When exporting traffic flow data, there are multiple types of information sent to the external data flow
collector. There is data information about each traffic flow, system information about each traffic flow, and
the traffic flow record itself. The information about the traffic flow record is called a template. Templates are
used to describe the types and lengths of individual header fields within a traffic flow data record.
Templates also communicate to the external data collector what type of information to expect in the ITM
flow record.
60000CRG0-35E
Specifies the number of packets to be sent before the template information
is sent to an external collector. Range is 1 to 600 packets.
Specifies the time in minutes that passes between instances of resending
the template information. Range is 1 to 3600 minutes.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1024