ADTRAN AOS Version R10.1.0 Command Reference Manual page 439

Command Reference Guide
show bgp regexp <expression>
Use the show bgp regexp command to display a summary of the Border Gateway Protocol (BGP) route
table that includes routes whose autonomous system (AS) path matches the specified expression.
Variations of this command include:
show bgp any-vrf ipv4 regexp <expression>
show bgp ipv4 regexp <expression>
show bgp vrf <name> ipv4 regexp <expression>
show bgp any-vrf ipv6 regexp <expression>
show bgp ipv6 regexp <expression>
show bgp vrf <name> ipv6 regexp <expression>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<expression>
any-vrf
ipv4
ipv6
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Release 17.1
Release 18.3
Release R10.1.0
60000CRG0-35E
Displays routes whose AS path matches the regular expression specified.
Optional. Displays BGP information for all VPN routing and forwarding
(VRF) instances.
Displays IPv4 BGP route information.
Displays IPv6 BGP route information.
Optional. Displays BGP information for a specific VRF instance.
Command was introduced.
Command was expanded to include the modifiers begin, exclude, and
include.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products. Command was also expanded to
include the any-vrf, ipv4, and vrf <name> parameters.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN voice products. Command was also expanded to include the
ipv6 parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
439