ADTRAN AOS Version R10.1.0 Command Reference Manual page 1051

Command Reference Guide
ip mgcp qos dscp <value>
Use the ip mgcp qos dscp command to specify the differentiated services code point (DSCP) value in the
Media Gateway Control Protocol (MGCP) packets transmitted by the MGCP gateway. This value can be
used by quality of service (QoS) mechanisms to give priority for this type of traffic. Use the no form of this
command to return to the default value.
Syntax Description
<value>
Default Values
By default, the DSCP value for MGCP packets is 46.
Command History
Release A2
Usage Examples
The following example specifies the DSCP value for MGCP gateways as 10:
(config)#ip mgcp qos dscp 10
60000CRG0-35E
Specifies the DSCP value. Range is 0 to 63.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1051