ADTRAN AOS Version R10.1.0 Command Reference Manual page 338

Command Reference Guide
debug network-forensics ip dhcp
Use the debug network-forensics ip dhcp command to display Dynamic Host Configuration Protocol
(DHCP) information collected from messages sent between clients connected to the network and the
network server. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Debug
messages can be activated for all clients or for specific clients connected to the network. Use the no form
of this command to disable the debug messages. Variations of this command include:
debug network-forensics ip dhcp
debug network-forensics ip dhcp hostname <hostname>
debug network-forensics ip dhcp interface gigabit-switchport <slot/port>
debug network-forensics ip dhcp ip <ip address>
debug network-forensics ip dhcp mac <mac address>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
hostname <hostname>
interface gigabit-switchport <slot/port>
ip <ip address>
mac <mac address>
Default Values
No default values are necessary for this command.
Command History
Release 17.8
60000CRG0-35E
Optional. Activates debug messages for the client with the
specified host name.
Optional. Activates debug messages for the client using the
specified interface.
Optional. Activates debug messages for the client with the
specified IP address. IP addresses should be expressed in
dotted decimal notation (for example, 10.10.10.1).
Optional. Activates debug messages for the client with the
specified medium access control (MAC) address. MAC
addresses should be expressed in the following format:
xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
338