ADTRAN AOS Version R10.1.0 Command Reference Manual page 961

Command Reference Guide
http authentication <listname>
Use the http authentication command to assign a specified authentication, authorization, and accounting
(AAA) list to use in authentication to the AOS device's Hypertext Transfer Protocol (HTTP) or HTTP
secure (HTTPS) server. AAA must be enabled (using the command
apply an AAA list to HTTP authentication. Use the no form of this command to remove the AAA list name
from HTTP authentication.
Syntax Description
<listname>
Default Values
By default, no HTTP/HTTPS authentication is configured.
Command History
Release 3.1
Release 18.3
Release R10.1.0
Usage Examples
The following example assigns the AAA list Mylist1 to HTTP authentication:
(config)#http authentication Mylist1
60000CRG0-35E
Specifies the AAA list to use in authentication to the AOS device's
HTTP/HTTPS server.
Command was introduced.
Command syntax was changed to remove the ip keyword for IPv6 support
in ADTRAN internetworking products.
Command syntax was changed to remove the ip keyword for ADTRAN
voice products.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
aaa on on page 889) before you can
961