Debug Bgp - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

debug bgp

Use the debug bgp command to activate debug messages associated with Internet Protocol version 4
(IPv4) Border Gateway Protocol (BGP). Debug messages display general BGP events, such as sent and
received message summaries, route processing actions, and results. These messages are displayed (real
time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.
Variations of this command include:
debug bgp
debug bgp events
debug bgp in
debug bgp out
debug bgp keepalives
debug bgp scan
debug bgp scan database
debug bgp scan route-table
debug bgp scan soft-reset
debug bgp updates
debug bgp updates quiet
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
events
in/out
keepalives
scan
database
route-table
soft-reset
updates
updates quiet
Default Values
By default, all debug messages in AOS are disabled.
60000CRG0-35E
Optional. Displays significant BGP events, such as a neighbor state
change.
Optional. Displays the same information as debug bgp, but limits
messages to the specified direction (in or out).
Optional. Displays BGP keepalive packets.
Optional. Displays BGP background scan details.
Optional. Limits output to BGP database scan details.
Optional. Limits output to BGP route table scan details.
Optional. Limits output to BGP soft reset scan details.
Optional. Displays detailed information on BGP updates for all neighbors.
Optional. Displays summary information about BGP neighbor updates.
(Note: updates quiet displays a one-line summary of what update displays
in 104 lines.)
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
227