ADTRAN AOS Version R10.1.0 Command Reference Manual page 303

Command Reference Guide
debug ip policy
Use the debug ip policy command to display policy-based routing events. Debug messages are displayed
(real time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug
messages. Variations of this command include the following:
debug ip policy
debug ip policy <acl name>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<acl name>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 11.1
Release 16.1
Usage Examples
The following example creates a standard ACL named PVT, which permits packets sourced from the
10.22.0.0/16 network and displays only these policy-based routing event messages:
>enable
#ip access-list standard PVT
#permit 10.22.0.0 0.0.255.255
#deny any
#debug ip policy PVT
60000CRG0-35E
Optional. Displays debug information only for the specified access control
list (ACL).
Command was introduced.
Command was expanded to filter based on an ACL.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
303