ADTRAN AOS Version R10.1.0 Command Reference Manual page 350

Command Reference Guide
debug probe
Use the debug probe command to activate debug messages associated with activities performed by the
named probe object. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the
no form of this command to disable the debug messages. Variations of this command include:
debug probe
debug probe <name>
debug probe <name> twamp
debug probe <name> twamp control
debug probe <name> twamp control events
debug probe <name> twamp control packets
debug probe <name> twamp test
debug probe <name> twamp test events
debug probe <name> twamp test packets
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<name>
twamp
control
events
packets
test
events
packets
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 16.1
Release 17.3
60000CRG0-35E
Optional. Specifies the probe object or activates the probe database debug
event messages for the specified probe.
Optional. Specifies Two-Way Active Measurement Protocol (TWAMP)
probe verbose output.
Activates TWAMP control probe verbose messages.
Optional. Activates TWAMP control probe events.
Optional. Activates decode TWAMP control packets messages.
Activates TWAMP Test probe verbose output.
Optional. Activates TWAMP Test probe events.
Optional. Activates decode TWAMP Test packets messages.
Command was introduced.
Command was expanded to include the TWAMP probe verbose output.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
350