ADTRAN AOS Version R10.1.0 Command Reference Manual page 1054

Command Reference Guide
ip mgcp standard
Use the ip mgcp standard command to specify the Media Gateway Control Protocol (MGCP) standard
the gateway will use. Use the no form of this command to return to the default standard. Variations of this
command include:
ip mgcp standard rfc3435
ip mgcp standard ncs
Syntax Description
rfc3435
ncs
Default Values
By default, MGCP gateways use the rfc3435 standard.
Command History
Release A2
Usage Examples
The following example sets the MGCP standard to ncs:
(config)#ip mgcp standard ncs
60000CRG0-35E
Specifies that the RFC 3435 MGCP standard is used.
Specifies that the MGCP 0.1/NCS 1.0 standard is used.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1054