ADTRAN AOS Version R10.1.0 Command Reference Manual page 1076

Command Reference Guide
ip rtp dtmf-relay min-duration <value>
Use the ip rtp dtmf-relay min-duration command to configure dual tone multi-frequency (DTMF) relay
duration that the DTMF digits must receive in order to be relayed. Use the no form of this command to
return to the default setting.
Syntax Description
<value>
Default Values
By default, the DTMF relay value is 60.
Command History
Release A2
Usage Examples
The following example sets the DTMF relay duration to 50:
(config)#ip rtp dtmf-relay min-duration 50
60000CRG0-35E
Specifies timeout period (in multiples of 10 milliseconds) allowed for DTMF
relay duration. Range is 20 to 250 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
1076