ADTRAN AOS Version R10.1.0 Command Reference Manual page 692

Command Reference Guide
show packet-capture
Use the show packet-capture command to display packet capturing statistics and verify the
packet-capture configuration. Variations of this command include:
show packet-capture captures
show packet-capture captures memory-usage
show packet-capture captures memory-usage realtime
show packet-capture captures sip-calls
show packet-capture captures sip-calls realtime
show packet-capture captures realtime
show packet-capture interfaces
show packet-capture interfaces realtime
show packet-capture memory-usage
show packet-capture memory-usage captures
show packet-capture memory-usage captures realtime
show packet-capture memory-usage captures sip-calls
show packet-capture memory-usage captures sip-calls realtime
show packet-capture memory-usage interfaces
show packet-capture memory-usage interfaces realtime
show packet-capture memory-usage realtime
show packet-capture sip-calls
show packet-capture sip-calls realtime
show packet-capture verbose
show packet-capture verbose realtime
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
captures
interfaces
memory-usage
sip-calls
realtime
verbose
60000CRG0-35E
Displays the active captures of every configured packet-capture.
Displays the interfaces with attached packet-captures and any observed
Netifs.
Displays packet capturing memory usage statistics. These statistics can be
further limited by active captures, Session Initiation Protocol (SIP) calls, and
interfaces.
Displays the active calls of every SIP packet-capture.
Optional. Displays the command output in realtime.
Optional. Displays detailed packet-capture information.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
692