ADTRAN AOS Version R10.1.0 Command Reference Manual page 1108

Command Reference Guide
ip sip access-class <name> in
Use the ip sip access-class in command to limit the traffic allowed to reach the Session Initiation Protocol
(SIP) stack by applying access control lists (ACLs) to incoming connections. Use the no form of this
command to disable this feature.
Syntax Description
<name>
Default Values
By default, no ACL is configured or applied, and all traffic reaches the SIP stack.
Command History
Release 16.1
Functional Notes
The ip sip access-class in command can be entered multiple times to apply multiple ACLs to incoming
traffic to the SIP stack.
For more information regarding ACL configuration, refer to the
page 3126.
Usage Examples
The following example specifies an IP SIP ACL name of HSV:
(config)#ip sip access-class HSV in
60000CRG0-35E
Specifies the name of a previously configured ACL to apply to incoming
traffic.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
IPv4 Access Control List Command Set on
1108