ADTRAN AOS Version R10.1.0 Command Reference Manual page 231

Command Reference Guide
debug color
Use the debug color command to activate color coding of debug messages. Debug messages are displayed
(real time) on the terminal (or Telnet) screen. Use the no form of this command to disable the color coding
of debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 16.1
Functional Notes
Color coding is based on the debug source and color choices are not configurable.
Usage Examples
The following example enables color coding of debug messages:
>enable
#debug color
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
231