ADTRAN AOS Version R10.1.0 Command Reference Manual page 313

Command Reference Guide
debug ip rtp quality-monitoring reporter
Use the debug ip rtp quality-monitoring reporter to activate debug messages associated with voice
quality monitoring (VQM) reporters. Debug messages are displayed (real time) on the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages. Variations of this command
include:
debug ip rtp quality-monitoring reporter
debug ip rtp quality-monitoring reporter <name>
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<name>
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 17.6
Usage Examples
The following is sample output of debug messages for VQM reporter Reporter1:
>enable
#debug ip rtp quality-monitoring reporter Reporter1
08:46:13 VQM.REPORTER Reporter1 1 Enqueuing VQM Report - 2575556352@10.1.3.9 to
6353@10.1.3.9, RTP=10.10.20.2:2234->10.17.138.1:3000
08:46:13 VQM.REPORTER Reporter1 1 Generating VQM Report
08:46:13 VQM.REPORTER Reporter1 1 Sending VQM Report
08:46:13 VQM.REPORTER Reporter1 1 Transaction 0x022ad5f0: state changed -> Client General
Request Sent
60000CRG0-35E
Optional. Specifies that debug messages are enabled only for the named
reporter.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
313