ADTRAN AOS Version R10.1.0 Command Reference Manual page 601

Command Reference Guide
source-uri <string>
to-uri <string>
Default Values
By default, only the most commonly used statistics are shown.
Functional Notes
These statistics will not be available if VQM is disabled.
Command History
Release 17.1
Usage Examples
In the following example, VQM active call statistics are sorted by lost packets:
#show ip rtp quality-monitoring active-calls sort-by loss
Displaying 30 estimated stream statistics from 15 completed calls
RTP stream: 3.3.3.3 : 50000, ppp 1 -> 1.1.1.1 : 3000, vlan 1
To: 5551234@voip.com
Call-start (duration): 11 Apr 2010 20:58:39 (93 s)
MOS LQ: 3.800
MOS PQ: 3.800
Loss: 413 pkts
Out-of-order: 30 pkts
Jitter (max): 20 ms
CODEC: g711
RTP stream: 1.1.1.1 : 3000, vlan 1 -> 3.3.3.3: 50000, ppp 1
To: 5551234@voip.com
From: 5551235@voip.com
Call-start (duration): 11 Apr 2010 20:58:39 (93 s)
MOS LQ: 3.800
MOS PQ: 3.800
Loss: 0 pkts
Out-of-order: 0 pkts
Jitter (max): 1 ms
CODEC: g711
--MORE--
60000CRG0-35E
Optional. Displays active call statistics based on a substring of the
URI/extension from which the RTP stream is sourced.
Optional. Displays active call statistics based on a substring of the To
uniform resource identifier (URI) or extension to which this RTP stream is
destined.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
601