ADTRAN AOS Version R10.1.0 Command Reference Manual page 408

Command Reference Guide
reload dot11 interface dot11ap <ap interface>
Use the reload dot11 interface dot11ap command to perform a cold start of a wireless access point (AP)
that is currently controlled by the wireless access controller (AC) on which the command is executed.
Variations of this command include:
reload dot11 interface dot11ap <ap interface>
reload dot11 interface dot11ap <ap interface> factory-default
Syntax Description
<ap interface>
factory-default
Default Values
No default values are necessary for this command.
Command History
Release 15.1
Usage Examples
The following example performs a cold start for AP interface 1:
>enable
#reload dot11 interface dot11ap 1
AP 1 reloaded
Router#
2006.12.23 19:14:03 DOT11.Session : AP 1: AP reboot.
2006.12.23 19:14:03 DOT11.Session : AP 1: Control session lost.
2006.12.23 19:14:03 DOT11.Session : AP 1: Control session established.
60000CRG0-35E
Specifies the AP interface number to reload. Range is 1 to 8.
Optional. Specifies reloading the unit with the factory default settings.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
408