Show Hosts - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

show hosts

Use the show hosts command to display the contents of the domain naming system (DNS) host table.
Output from this command displays both Internet Protocol version 4 (IPv4) and IPv6 entries, as well as
separate server addresses for the DNS client and proxy. Variations of this command include:
show hosts
show hosts realtime
show hosts verbose
show hosts vrf <name>
show hosts vrf <name> realtime
show hosts vrf <name> verbose
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
realtime
verbose
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release 3.1
Release 16.1
Release 17.1
Release 18.3
60000CRG0-35E
Optional. Displays information in real time.
Optional. Displays the details of the IP name, style, name servers, and host
table entries without the truncation of long IP addresses and host names.
Optional. Displays DNS information for the specified VPN routing and
forwarding (VRF) instance. If no VRF instance is specified, host table
information for the default VRF instance is displayed.
Command was introduced.
Command was expanded to include the vrf <name> parameter.
Command was expanded to include the modifiers begin, exclude, and
include.
Command was expanded to include both IPv4 and IPv6 entries in the
output and the realtime keyword.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
513