ADTRAN AOS Version R10.1.0 Command Reference Manual page 638

Command Reference Guide
Syntax Description
<ipv6 address>
<ipv6 prefix/prefix-length>
bgp
connected
longer-prefixes
static
summary
summary realtime
verbose
vrf <name>
Default Values
No default values are necessary for this command.
Command History
Release 18.1
Release R10.1.0
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal length (using the terminal length command; refer to
page 837).
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
60000CRG0-35E
Optional. Specifies a valid IPv6 address. IPv6 addresses should be
expressed in colon hexadecimal notation (X:X:X:X::X). For example,
2001:DB8:1::1.
Optional. Specifies the IPv6 prefix. IPv6 prefixes should be expressed in
colon hexadecimal format (X:X::X/<Z>). For example, 2001:DB8:3F::/64.
The prefix length (<Z>) is an integer with a value between 0 and 128.
Optional. Displays IPv6 route information for Border Gateway Protocol
(BGP) configurations.
Optional. Displays only the IPv6 routes for directly connected networks.
Optional. Displays only the IPv6 routes matching the specified network.
Optional. Displays only the IPv6 routes that were statically entered.
Optional. Displays a summary of all IPv6 route information.
Optional. Displays full-screen output in real time. Refer to the Functional
Notes below for more information.
Optional. Enables detailed messaging.
Optional. Displays only the IPv6 routes for the specified VPN routing and
forwarding (VRF).
Command was introduced.
Command was expanded to include the bgp parameter.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
terminal length <number> on
638