ADTRAN AOS Version R10.1.0 Command Reference Manual page 1032

Command Reference Guide
ip hw-access-list extended <name>
Use the ip hw-access-list extended command to create and name an IP hardware access control list
(ACL). This command also enters the ACL's configuration mode. Using the no form of this command
deletes the IP hardware ACL.
For a complete list of all IP hardware ACL configuration commands, refer to the
Hardware ACL and Access Map Command Set on page
Syntax Description
<name>
Default Values
By default, all AOS security features are disabled, and there are no configured hardware ACLs.
Command History
Release 17.6
Functional Notes
This command only creates an empty hardware ACL, it does not configure it. For additional IP hardware
ACL configuration commands and configuration parameters, refer to the
Command Set on page 3109
https://supportforums.adtran.com
Usage Examples
The following example creates an IP hardware ACL Trusted and enters the IP hardware ACL
configuration mode:
(config)#ip hw-access-list extended Trusted
Configuring New IP Hardware Extended ACL "Trusted"
(config-ext-ip-hw-nacl)#
Technology Review
Hardware ACLs are used as traffic selectors by the hardware access maps; by themselves they do
nothing. Hardware ACLs are composed of an ordered list of entries with an implicit deny any at the end of
each list. A hardware ACL with no entries includes an implicit permit any. An ACL entry contains two parts:
an action (permit or deny) and a frame pattern. A permit ACL matches frames (meeting the specified
pattern) and allows them to enter the router system. A deny ACL advances AOS to the next access list
entry.
60000CRG0-35E
Specifies the name of the IP hardware ACL.
Command was introduced.
or the Hardware ACLs in AOS configuration guide available online at
(article number 3088).
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
3109.
Hardware ACL and Access Map
1032