ADTRAN AOS Version R10.1.0 Command Reference Manual page 635

Command Reference Guide
show ipv6 policy-stats
Use the show ipv6 policy-stats command to display a list of current Internet Protocol version 6 (IPv6)
access control policy (ACP) statistics. Refer to
information on configuring IPv6 ACPs. Variations of this command include:
show ipv6 policy-stats
show ipv6 policy-stats <ipv6 acp name>
The output of all show commands can be limited by appending the following modifiers to
the end of the command: | begin <text>, | exclude <text>, and | include <text>. The
include modifier limits output to lines that contain the specified text, the exclude modifier
excludes any lines with the specified text, and the begin modifier displays the first line of
output with the specified text and all lines thereafter.
For specific instructions and examples regarding these modifiers, refer to the introduction
of the Enable Mode Command Set on page
Syntax Description
<ipv6 acp name>
Default Values
No default values are necessary for this command.
Command History
Release 18.1
Usage Examples
The following example displays a list of current IPv6 ACP statistics:
>enable
#show ipv6 policy-stats
60000CRG0-35E
ipv6 policy-class <ipv6 acp name> on page 1215
Optional. Displays policy class statistics for a specific IPv6 ACP.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
83.
for
635