Debug Arp - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

debug arp

Use the debug arp command to activate debug messages associated with IP Address Resolution Protocol
(ARP) transactions. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the
no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 9.3
Usage Examples
The following example activates debug messages associated with ARP transactions:
>enable
#debug arp
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
221