ADTRAN AOS Version R10.1.0 Command Reference Manual page 242

Command Reference Guide
debug dot11 all
Use the debug dot11 all command to enable all dot11 debugging for the wireless access controller (AC).
Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in AOS are disabled.
Command History
Release 15.1
Usage Examples
The following example activates all dot11 debug messages on the AC:
>enable
#debug dot11 all
60000CRG0-35E
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
242