ADTRAN AOS Version R10.1.0 Command Reference Manual page 956

Command Reference Guide
hmr rule-set <name>
Use the hmr rule-set command to create a Session Initiation Protocol (SIP) header manipulation rule
(HMR) rule set. An HMR rule set is a named collection of one or more sequenced message rules used for
SIP header and message manipulation. When a rule set is applied to a message, all matching message rules
are processed in sequence. Use the no form of this command to remove the HMR rule set.
Syntax Description
<name>
Default Values
By default, no HMR rule sets are configured.
Command History
Release R10.1.0
Functional Notes
HMR rule sets are used to apply message rules to SIP traffic. These message rules are a collection of one
or more SIP header commands, that determine the types of SIP headers to act upon, and the action to be
taken. For more information about the configuration of SIP HMR rules and rule sets, refer to
Command Set on page 3338
available online at https://supportforums.adtran.com
Usage Examples
The following example creates the HMR rule set SET1, and enters the rule set's configuration mode:
(config)#hmr rule-set SET1
(config-rule-set-SET1)#
60000CRG0-35E
Specifies the name of the HMR rule set. Names must be unique for each
configured rule set.
Command was introduced.
or the configuration guide Manipulating SIP Headers and Messages in AOS,
Copyright © 2012 ADTRAN, Inc.
Global Configuration Mode Command Set
(article number 3526).
SIP HMR
956