ADTRAN AOS Version R10.1.0 Command Reference Manual page 836

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
telnet vrf <name> stack-member <number>
Use the telnet vrf stack-member command to open a Telnet session (through AOS) with a member of the
stack.
Syntax Description
vrf <name>
stack-member <number>
Default Values
No default values are necessary for this command.
Command History
Release 16.1
Functional Notes
VRF on AOS products allows a single physical router to be partitioned into multiple virtual routers. Each
router instance has its own route table and interface assignments. Beginning with Release 16.1, all AOS
routers supporting multiple VRF instances (multi-VRF) have an unnamed default VRF instance regardless
of whether multi-VRF is configured. Therefore, executing the abovementioned commands without
specifying a VRF will only affect the default unnamed VRF.
Usage Examples
The following example opens a Telnet session with stack member 3 of the VRF red:
>enable
#telnet vrf red stack-member 3
Trying Stack Member 3...Press Ctrl+C to abort
60000CRG0-35E
Specifies the VPN routing and forwarding (VRF) where the stack member
exists.
Specifies which member of the stack to which to Telnet.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Enable Mode Command Set
836

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents